Out-of-plane shear strength of cross-laminated timber made of Japanese Larch (Larix kaempferi) with various layups and spans, Journal of Wood Science

Cross-laminated timber (CLT) is a promising construction material. When CLT is used for horizontal applications, shear stress occurs in the out-of-plane direction and can fracture the transverse layers owing to the rolling shear. The out-of-plane shear strength of the CLT can be evaluated by an out-of-plane loading test and is affected by the CLT layups and/or span conditions. In this study, we conducted out-of-plane loading tests on 3-layer 4-ply, 5-layer 7-ply, 7-layer 7-ply, and 9-layer 9-ply CLT made of Japanese larch (Larix kaempferi) under various spans and investigated the effect of layups and spans on the out-of-shear strength. The fracture modes of the specimens were classified into three types: shear fracture, shear fracture accompanied by bending fracture, and bending fracture. The out-of-plane shear strength of the specimens except for the 9-layer 9-ply ones decreased as the span increased, and then converged to a constant value (1.0–1.5 kN/mm2). In addition, the shear strength decreased exponentially as the number of laminae in the transverse layers increased and then converged to a constant value (1.0–1.5 kN/mm2). The out-of-plane shear strength of the 9-layer 9-ply specimens decreased as the shear span increased; however, the converged value with a longer span could not be calculated because the tests were conducted under only three-span conditions. The shear strength of 3-layer 4-ply specimens was lower than that of the other layups. The results of the Monte Carlo simulation of the shear strength of the laminae in the transverse layers showed that a model, which assumed that the minimum shear strength of the laminae in the transverse layers determined the shear strength of a specimen, tended to correspond with the decreasing tendency of shear strength with longer spans. The results showed that the weakest link model for the out-of-plane shear fracture of the CLT would relate to a specimen with long span.

Journal of the Korean Wood Science and Technology

PDF) Out-of-plane shear strength of cross-laminated timber made of Japanese Larch (Larix kaempferi) with various layups and spans

Out-of-plane shear strength of cross-laminated timber made of Japanese Larch (Larix kaempferi) with various layups and spans, Journal of Wood Science

Out-of-plane shear strength of cross-laminated timber made of Japanese Larch (Larix kaempferi) with various layups and spans, Journal of Wood Science

Influence of Lamination Aspect Ratios and Test Methods on Rolling Shear Strength Evaluation of Cross-Laminated Timber

PDF) Gluing Techniques on Bond Performance and Mechanical Properties of Cross-Laminated Timber (CLT) Made from Larix kaempferi

Evaluation of rolling shear modulus and strength of Japanese cedar cross-laminated timber (CLT) laminae, Journal of Wood Science

Cross-Laminated Timber: A Review on Its Characteristics and an Introduction to Chinese Practices

Forests, Free Full-Text

Evaluation of rolling shear modulus and strength of Japanese cedar cross-laminated timber (CLT) laminae, Journal of Wood Science